Hey folks,
- With the APC / APC-R, you can adjust your BMPCC 4K & 6K settings remotely using the official Blackmagic ATEM Software! The APC is compatible with the ATEM Television Studio HD, Pro HD, Pro 4K, ATEM Production Studio 4K 1M/E & 2 M/E and ATEM Broadcast Studio 4K switchers. It is not compatible with ATEM Mini and ATEM Mini Pro.
- If you are running ATEM software v8.3 or up then you can now set the ATEM Timecode to your computer time. The ATEM Mini range support this through the software control panel but the older ATEM's only allow you to manually enter or reset the current time code.Setting the ATEM Timecode can make it easier to.
- The tool installed by the Blackmagic ATEM Switchers executable is the ATEM Software Control. This is an app with a simple interface and few, yet on-point commands. When establishing a connection.
- The backend of the ATEM Mini Pro ISO, from left to right, has the AC power connection, the Ethernet ATEM Control, which was attached to my MacBook Pro running the ATEM Software Control. The USB-C (3.1) output was connected to a SanDisk 2 Terabyte SSD drive.
The ATEM Software Control panel is designed with separate tabs so it's easy to find the controls you need. The switcher tab is for switcher control and includes palettes for adjusting keys, transitions, media players and more. The settings tab changes the switcher settings and customizes the multi view, and the media pool tab manages graphics.
I've actually never been able to find any specs for a PC just running the control software other than Windows 7, although for the higher end versions of course it specifies Windows 64 bit and specific models.
Is there a known issue with running the ATEM control software on a non-dual core PC even if it's running Windows 7?
Thanks,
Jeff
The software solution required to gain full control over ATEM advanced broadcast production switchers through a user-friendly interface
What's new in Blackmagic ATEM Switchers 8.6.2:
- Adds support for VideoHub Protocol to ATEM Constellation 8K.
- ATEM Camera Control Panel now controls the ND filters for Pocket Cinema Camera 6K Pro.
- ATEM Camera Control Panel has Pivot and Tint control added plus enhanced Shutter Angle selection.
- ATEM Camera Control Panel has improved zoom and focus control sensitivity.
Blackmagic ATEM Switchers is a suite that includes multiple tools. It enables directing inputs from ATEM devices and controlling live production and television switchers.
However, when referring to ATEM products and switchers, some clarifications need to be addressed. For example, there are a bunch of physical products and pieces of equipment — the hardware that is used mainly for video and sound broadcasting, for live transmissions (at the highest qualitative levels).
On the flip side, there is also the software, programs that run on ATEM hardware (and not only), connect systems and databases to external equipment, control the ATEM equipment/machines, or help manage/export recordings and large files for further editing.
Blackmagic ATEM Switchers is an advanced set of tools. These help process and redirect inputs and outputs from various sources, handle 4K and Ultra HD video streams, and act as a control center that allows upstream keyer transition management, real-time video adaptation through downstream keyers (for adding extra video layers), or balancing the video compositions.
The tool installed by the Blackmagic ATEM Switchers executable is the ATEM Software Control. This is an app with a simple interface and few, yet on-point commands. When establishing a connection to external devices, the tool allows connecting through manual IP addresses or using an ATEM switcher name. After connecting your devices, you have the available controllers for balancing your audio and video composition, the MIDI control, the mapping options, and more.
In conclusion, Blackmagic ATEM Switchers are extensive and powerful professional and digital production tools, capable of switching and processing multiple video sources, including live transmissions.
Atem Software Control Tutorial
System requirements
I've actually never been able to find any specs for a PC just running the control software other than Windows 7, although for the higher end versions of course it specifies Windows 64 bit and specific models.
Is there a known issue with running the ATEM control software on a non-dual core PC even if it's running Windows 7?
Thanks,
Jeff
The software solution required to gain full control over ATEM advanced broadcast production switchers through a user-friendly interface
What's new in Blackmagic ATEM Switchers 8.6.2:
- Adds support for VideoHub Protocol to ATEM Constellation 8K.
- ATEM Camera Control Panel now controls the ND filters for Pocket Cinema Camera 6K Pro.
- ATEM Camera Control Panel has Pivot and Tint control added plus enhanced Shutter Angle selection.
- ATEM Camera Control Panel has improved zoom and focus control sensitivity.
Blackmagic ATEM Switchers is a suite that includes multiple tools. It enables directing inputs from ATEM devices and controlling live production and television switchers.
However, when referring to ATEM products and switchers, some clarifications need to be addressed. For example, there are a bunch of physical products and pieces of equipment — the hardware that is used mainly for video and sound broadcasting, for live transmissions (at the highest qualitative levels).
On the flip side, there is also the software, programs that run on ATEM hardware (and not only), connect systems and databases to external equipment, control the ATEM equipment/machines, or help manage/export recordings and large files for further editing.
Blackmagic ATEM Switchers is an advanced set of tools. These help process and redirect inputs and outputs from various sources, handle 4K and Ultra HD video streams, and act as a control center that allows upstream keyer transition management, real-time video adaptation through downstream keyers (for adding extra video layers), or balancing the video compositions.
The tool installed by the Blackmagic ATEM Switchers executable is the ATEM Software Control. This is an app with a simple interface and few, yet on-point commands. When establishing a connection to external devices, the tool allows connecting through manual IP addresses or using an ATEM switcher name. After connecting your devices, you have the available controllers for balancing your audio and video composition, the MIDI control, the mapping options, and more.
In conclusion, Blackmagic ATEM Switchers are extensive and powerful professional and digital production tools, capable of switching and processing multiple video sources, including live transmissions.
Atem Software Control Tutorial
System requirements
- USB 3.0 port
- Ethernet connection for switcher control
- ATEM Switcher device
Filed under
Atem Software Control Keyboard Shortcuts
This enables Disqus, Inc. to process some of your data. Disqus privacy policyBlackmagic ATEM Switchers 8.6.2
add to watchlistsend us an update- runs on:
- Windows 10 64 bit
- file size:
- 1.4 GB
- filename:
- Blackmagic_ATEM_Switchers_Windows_8.6.2.zip
- main category:
- System
- developer:
- visit homepage
top alternatives FREE
top alternatives PAID
